Page 1 Collaboration Endpoint software version 9.14 OCTOBER 2020 Administrator guide for Cisco Webex Room Panorama and Room 70 Panorama D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 2: Table Of Contents
Test the loudspeaker connections ..................55 Using extra loudspeakers and sound reinforcement ............57 Connect the Touch 10 controller ..................58 D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 3 RTP settings ........................145 About Ethernet ports ......................218 Security settings ....................... 146 Audio inputs and outputs ....................219 D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 4 Serial interface for maintenance ..................223 Open TCP ports ........................ 224 HTTPFeedback address from TMS................... 226 Link an on-premises registered device to Cisco Webex Edge for Devices ..... 227 Register a device to the Cisco Webex cloud service ............228 Supported RFCs ....................... 229 Calculating minimum bandwidth ..................
Page 5: Introduction
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide  Introduction Introduction Configuration Peripherals Maintenance Device settings Appendices Chapter 1 Introduction D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 6: User Documentation And Software
Explore the Cisco Project Workplace to find inspiration and guidelines when preparing an office or meeting room for video conferencing: ► https://www.cisco.com/go/projectworkplace D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 7: What's New
This means you can connect a USB Pro and Boards. keyboard and/or mouse to your Desk Pro, and use them for your laptop. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 8 (room overview) used for Speaker Tracking. The feature has no effect on the view available for manual camera control. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 9 Room 70 G2, Room Panorama, Room 70 Panorama, Desk Pro, Boards) OLD: Default: DefaultCameraPosition WebRTC InteractionMode (Room Kit Mini, Desk Pro, Boards) NEW: Default: RestoreCameraPosition D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 10 Video DefaultLayoutFamily Remote (Room Panorama, Room 70 Panorama) OLD: Auto/Equal/Overlay/Panorama/Prominent/Single NEW: Auto/Equal/Overlay/Prominent/Single Video DefaultLayoutFamily Remote (Desk Pro) OLD: Auto/Equal/Modal/Overlay/Prominent/Single NEW: Auto/Equal/Overlay/Prominent/Single D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 11: Room Panorama Products At A Glance
The Room Panorama is built on the Cisco Webex Room Kit Pro technology platform, with the Codec Pro and the Quad Camera as core. It has two 82-inch 8K video screens, and a 65-inch 4K screen for content presentation.
Page 12 The Room 70 Panorama is based on the Cisco Webex Room 70 Dual G2. It has a powerful codec, a quad-camera, two 70-inch LED screens, and a 55-inch or 65-inch 4K screen for content presentation.
Page 13: Power On And Off
Refer to the wiring diagram for an overview of all components. The wiring diagram is available online. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 14 Off and then On. Exit standby mode • Tap the screen of the Touch controller. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 15: How To Administer The Video Conferencing Device
SystemUnit Software Version More settings and statuses are available in the web interface than in the API. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 16 Hover the mouse over the user name and choose Signout from the drop-down list. Internet Explorer is no longer supported. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 17 (CUCM, VCS); the pages shown in grey color are not available if the device is registered to the Cisco cloud service (Cisco Webex). In both cases, a user that is signed in, sees only the pages that he has access rights for.
Page 18 If a setting is locked down, an authentication window pops up, and you have to sign in with ADMIN credentials to proceed. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 19: Configuration
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide  Introduction Configuration Configuration Peripherals Maintenance Device settings Appendices Chapter 2 Configuration D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 20: User Administration
Use the Back button to leave without making any changes. 3. Click Delete user... and confirm when prompted. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 21: Change The Device Passphrase
4. Click Change passphrase to save the change. Use the Back button to leave without making any changes. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 22: Restrict The Access To The Settings Menu
Settings Locked down settings menu. Locked down settings are marked with a padlock. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 23: Device Configuration
Categories with unsaved changes are marked with an edit symbol ( D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 24: Add A Sign In Banner
The banner is shown after the user has signed in to the web interface or the command line interface. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 25: Add A Welcome Banner
. <enter> the command line interface. × Click to close the banner. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 26: Manage The Service Certificates Of The Device
10 years are accepted. The certificates and certificate issuers in the illustration are examples. Your device has other certificates. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 27: Manage The Lists Of Trusted Certificate Authorities - Cas
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 28 ► Upload a CA certificate to the device chapter how to update the list of trusted CA certificates. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 29 ► Upload a CA certificate to the device chapter how to update the list of trusted CA certificates. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 30 The entries in a new file with CA certificates are appended to the existing list. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 31: Set Up Secure Audit Logging
ExternalSecure. 4. Click Save for the change to take effect. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 32: Delete Cucm Trust Lists
The trust lists’ fingerprints and an overview of the certificates in the lists are displayed on the web page. This information may be useful for troubleshooting. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 33: Change The Persistency Mode
There is more information about performing a factory reset in ► Factory reset the video conferencing device chapter. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 34: Set Up Intelligent Proximity For Content Sharing
30 connections when the View shared content on a mobile device service is Wireless share from a mobile device disabled; 7 connections when this service is enabled. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 35 The tile based interface introduced with Windows 8 is not supported. End-user license agreement Read the end-user license agreement carefully, ► https://www.cisco.com/c/en/us/td/docs/general/warranty/ English/EU1KEN_.html D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 36 Touch controller does not have any effect. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 37 Wireless share from a desktop client: • Go to Proximity > Services > ContentShare > FromClients and choose Enabled. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 38 Expressway, and your laptop is connected via VPN (VPN client dependent). D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 39: Select A Multi-Screen Background Image
UserInterface WallpaperBundle Set Name: "Name" Turn off the multi-screen background image feature: xCommand UserInterface WallpaperBundle Clear D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 40: Add Corporate Branding To The Screen And Touch 10 User Interface
• PNG-format with transparent background • Minimum 272×272 pixels (it will be scaled automatically) D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 41 A white logo (so that it goes well with the dark background brand image) • PNG-format with transparent background • Minimum 272×272 pixels D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 42: Add A Custom Wallpaper
BMP, GIF, JPEG, PNG Maximum file size: 16 megapixels The custom wallpaper is automatically activated once uploaded. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 43: Choose A Ringtone And Set The Ringtone Volume
Use the slide bar to adjust the Use the stop button (  ) to ringtone volume. end the playback. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 44: Manage The Favorites List
1. Click a contacts name followed by in the dialog that pops up. Edit contact. 2. Click Delete to remove the local contact. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 45: Set Up Accessibility Features
Setup > Configuration. 2. Go to UserInterface > Accessibility > IncomingCallNotification and select AmplifiedVisuals. 3. Click Save. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 46: Provisioning Of Product Specific Configurations From Cucm
UCM to the configuration settings from CUCM, the device, or both of them CUCM. device. The administrator had to rely on Cisco TMS or the web together. interface of the device to configure all the other settings.
Page 47 CUCM. They don't correspond to a local setting on the device. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 48: Peripherals
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide  Introduction Configuration Peripherals Peripherals Maintenance Device settings Appendices Chapter 3 Peripherals D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 49: Connect Input Sources
This applies whether the content is HDCP protected or not. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 50 Intuitive names and icons make source selection easier. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 51: Extend The Number Of Input Sources
INTEGRATOR, or ADMIN user roles in order to access the API commands that you need when programming the control system. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 52: Information About 4K Resolution
4kp30 uses about twice the data rate of 1080p60 • 4kp60 uses about four times the data rate of 1080p60 D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 53: Information About Hdmi Cables
The resolution formats larger than 1920×1080@60fps require use of high speed HDMI cables. For guaranteed operation, use a HDMI cable from Cisco, or use a cable that complies with the high speed HDMI 1.4b Category 2 specification. We recommend that you order the HDMI presentation cable from Cisco (HDMI 1.4b Category 2).
Page 54: Set Up The Speakertrack Feature
This feature works together with speaker tracking to provide the best possible conferencing experience. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 55: Test The Loudspeaker Connections
Syntax and semantics are explained in the API guide for the device. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 56 Read the Getting Started guide to find how to fix the problem. • SB1-SB4: The subwoofers below the screens (behind the cosmetic panels) D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 57: Using Extra Loudspeakers And Sound Reinforcement
Using Extra Loudspeakers and Sound Reinforcement guide for a comprehensive description and best practices for the solution. Go ► https://www.cisco.com/go/in-room-control-docs D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 58: Connect The Touch 10 Controller
Touch 10 is successfully connected to the device. The Ethernet connector is at the rear of Touch 10. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 59 Touch 10 is successfully connected to the device. The Ethernet connector is at the rear of Touch 10. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 60 Ethernet cable can be up to 100 m is at the rear of Touch 10. (330 ft). D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 61 (behind cover) Ethernet with PoE: for power and Ethernet Sound bar for audio adjustment Audio mute D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 62 Ethernet Sound bar for audio adjustment Mini-jack, 3.5 mm Audio mute Not in use (not in use) D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 63: Maintenance
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide  Introduction Configuration Peripherals Maintenance Maintenance Device settings Appendices Chapter 4 Maintenance D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 64: Installing New Software
SX series, MX series, and DX: When upgrading these devices, you can use the PKG file since it also contains software for the peripherals. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 65 Sign in to the web interface and navigate to Maintenance > Software Upgrade. Download new software Each software version has a unique file name. Go to the Cisco Download Software web page, and select your product: ► https://software.cisco.com/download/home Software release notes The format of the file name is: For a complete overview of the news and changes, we “cmterm-s53300ce9_14_x-yyy.k3.cop.sgn”...
Page 66: Add Option Keys
If you want to add more than one option key, repeat these steps for all keys. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 67: Device Status
The status shown in the illustration serve as an example. The status of your device may be different. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 68: Run Diagnostics
The messages shown in the illustration serve as examples. Your device may show other information. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 69: Download Log Files
Refresh a log file list Click the refresh button for Current logs or Historical logs to update the corresponding lists. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 70: Create A Remote Support User
The remote support user is valid for seven days, or until it is deleted. Delete remote support user Click Delete user. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 71: Backup And Restore Configurations And Custom Elements
Some settings may require that you restart the device before they take effect. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 72: Cucm Provisioning Of Custom Elements
If not using the TFTP Service, you must enter the complete URI for the <hostname>:<portnumber>/<path-and-filename> customization template: For example: • http://host:6970/backup.zip, or • https://host:6971/backup.zip D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 73: Tms Provisioning Of Custom Elements
IP addresses, device name, and contact information, you may and up with devices that you cannot reach. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 74: Revert To The Previously Used Software Image
Wait while the device resets. The device restarts automatically when finished. This procedure may take a few minutes. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 75: Factory Reset The Video Conferencing Device
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 76 Setup assistant starts with the Welcome screen. settings, the Setup assistant starts with the Welcome screen. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 77 When the device has been successfully reset to factory settings, the Setup assistant starts with the Welcome screen. Reset button (pin hole) D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 78: Factory Reset Cisco Touch 10
It is not possible to undo a factory reset. Open the cover to find the reset button Reset button Mute button starts blinking D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 79: Factory Reset Cisco Telepresence Touch 10
It is not possible to undo a factory reset. Mute Volume down D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 80: Capture User Interface Screenshots
All captured snapshots are included in the list above the buttons. Click the screenshot ID to display the image. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 81: Device Settings
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide  Introduction Configuration Peripherals Maintenance Device settings Device settings Appendices Chapter 5 Device settings D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 82: Overview Of The Device Settings
Audio SoundsAndAlerts RingTone ..................95 Audio SoundsAndAlerts RingVolume .................. 95 Audio Ultrasound MaxVolume ..................... 95 Audio Ultrasound Mode ...................... 95 D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 83 Conference DoNotDisturb DefaultTimeout ............... 104 HttpClient Mode .........................113 Conference Encryption Mode ................... 104 HttpClient UseHttpProxy ....................113 Conference FarEndControl Mode ..................104 D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 84 NetworkServices SIP Mode ....................129 Network [n] IPv4 Gateway ....................121 Network [n] IPv4 SubnetMask ....................121 NetworkServices SNMP CommunityName ..............130 D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 85 Security Session InactivityTimeout ..................147 Provisioning LoginName ....................138 Security Session MaxFailedLogins ..................147 Provisioning Mode ......................138 Security Session MaxSessionsPerUser................148 D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 86 Standby Signage Url ......................156 UserInterface Proximity Notifications ................165 Standby StandbyAction ....................156 UserInterface Security Mode .................... 166 D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 87 Video Input Connector [n] PreferredResolution ..............175 Video Input Connector [n] PresentationSelection ..............176 Video Input Connector [n] Quality ..................176 D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 88: Audio Settings
On: Enable the ARC channel of HDMI output n (audio is sent to the video conferencing device). D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 89: Audio Input Hdmi [N] Videoassociation Muteoninactivevideo
On: Turn on the dereverberation. Right: The microphone input signal is the right channel of a stereo signal. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 90: Audio Input Microphone [N] Echocontrol Noisereduction
Off: No equalizer. On: Enable the equalizer for the source that is connected to the microphone input. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 91: Audio Input Microphone [N] Phantompower
On: Enable the phantom power on the microphone input. Use this when connecting False: The attenuation of the microphone signal is disabled. directly to microphones that require phantom power, including the Cisco Table True: The device attenuates the microphone signal if clicking noise from keyboards is Microphone and Cisco Ceiling Microphone.
Page 92: Audio Microphones Mute Enabled
Off: Disable the ARC output on the HDMI input. On: Enable the ARC output on the HDMI input. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 93: Audio Output Connectorsetup
Mono: The Audio Line output signal is a mono signal. Right: The Audio Line output signal is the right channel of a stereo signal. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 94: Audio Output Line [N] Delay Delayms
Requires user role: ADMIN, INTEGRATOR Default value: 0 Value space: Integer (-24..0) Range: Select the gain in decibel (dB). D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 95: Audio Output Line [N] Mode
Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 96: Bookings Settings
Otherwise it will use WebRTC. WebRTC: The device will always use WebRTC for Microsoft Teams meetings. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 97: Callhistory Settings
Off: New entries are not added to the call history. On: New entries are stored in the call history list. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 98: Cameras Settings
Manual: Enable manual control of the camera brightness. The brightness level is set using the Cameras Camera [n] Brightness DefaultLevel setting. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 99: Cameras Camera [N] Focus Mode
Value space: Auto/Manual the room lighting conditions. Auto: Cisco TelePresence Precision 60 camera: The camera will do continuous auto Requires user role: ADMIN, INTEGRATOR focusing. It will, more specifically, run auto focus once a call is connected, after pan, tilt, zoom have changed, and generally when the camera identifies a change in the scene.
Page 100: Cameras Camera [N] Whitebalance Level
Auto option in the configuration. the room lighting conditions. The Cisco cameras support both anti-flickering and auto detection of line frequency. Auto is the default value, so you should change this setting if you have a camera that does not Requires user role: ADMIN, INTEGRATOR support auto detection.
Page 101: Cameras Presentertrack Cameraposition Zoom
Value space: String (0..255) True: The PresenterTrack feature is available for use. The coordinates for the trigger zone. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 102: Cameras Speakertrack Closeup
Off: The Snap to Whiteboard feature is disabled. Off: Speaker tracking is switched off. If you have a Cisco TelePresence SpeakerTrack 60 On: The Snap to Whiteboard feature is enabled.
Page 103: Conference Settings
Default value: Off (CUCM) version 9.1.2 or newer, Cisco TelePresence Video Communication Server (VCS) version X8.1 or newer, Cisco Media Server (CMS) version 2.1 or newer). Change this setting Value space: Off/On if you want to disable the active control features.
Page 104: Conference Defaultcall Protocol
If multiple protocols are available, the order of priority is: 1) SIP; 2) H323; 3) H320. If the device cannot register, the auto-selection chooses H323. Value space: Off/On/BestEffort H320: All calls are set up as H.320 calls (only applicable if used with Cisco TelePresence Off: The device will not use encryption. ISDN Link).
Page 105: Conference Farendcontrol Signalcapability
Requires user role: ADMIN Default value: 20000 Value space: Integer (64..20000 ) The maximum receive call rate (kbps). D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 106: Conference Maxtotaltransmitcallrate
If registered to a Cisco TelePresence Video Communication Server (VCS), the device MaxTransmitCallRate setting. can use MultiSite when calling other video devices. If registered to a Cisco Unified Communications Manager (CUCM) version 8.6.2 or newer, the device can use either a Requires user role: ADMIN CUCM conference bridge, or the device's own built-in MultiSite feature.
Page 107: Conference Incomingmultisitecall Mode
Stop: The device stops the presentation sharing when the remote site puts you on hold. The presentation will not continue when the call is resumed. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 108: Facilityservice Settings
Default value: Service 1: "Live Support" Other services: "" Value space: String (0, 1024) The name of the facility service. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 109: Gpio Settings
OutputStandbyActive: The pin is set Low when the device is in standby mode, and High when the device is not in standby mode. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 110: H323 Settings
H323 Gatekeeper Address must also be configured. Value space: String (0, 50) The authentication login name. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 111: H323 Encryption Keysize
IP address in Q.931 and H.245. If the H323 NAT Address is wrong or not set, H.323 calls cannot be set up. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 112: H323 Nat Address
Static: When set to Static the ports are given within a static predefined range [5555- 6555]. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 113: Httpclient Settings
Off: Set up communication directly with the server (not using a proxy). On: Set up communication via proxy. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 114: Httpfeedback Settings
On: The device checks if the certificate of the HTTPS server can be trusted. If not, the connection between the device and the server is not established. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 115: Logging Settings
Default value: "" Value space: String (0, 255) A valid IPv4 address, IPv6 address or DNS name. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 116: Logging External Server Port
On: The device checks if the certificate of the syslog server can be trusted. If not, the connection between the device and the server is not established. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 117: Macros Settings
Off: The macro runtime will not start automatically after a restart of the device. On: The macro runtime will start automatically after a restart of the device. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 118: Network Settings
Value space: String (0, 64) Off: The 802.1X authentication is disabled. The DNS domain name. On: The 802.1X authentication is enabled. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 119: Network [N] Ieee8021X Anonymousidentity
TLS handshake with the server. Default value: "" Value space: String (0, 64) The 802.1X Anonymous ID string. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 120: Network [N] Ieee8021X Eap Md5
Define the Peap (Protected Extensible Authentication Protocol) mode. Authenticates LAN Authentication Protocol that relies on a shared secret. Md5 is a Weak security. clients without the need for client certificates. Developed by Microsoft, Cisco and RSA Security. Requires user role: ADMIN, USER...
Page 121: Network [N] Ipv6 Assignment
Requires user role: ADMIN, USER Default value: "" Value space: String (0, 64) A valid IPv4 address. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 122: Network [N] Ipv6 Address
Off: Disable the retrieval of DHCP options from a DHCPv6 server. On: Enable the retrieval of a selected set of DHCP options from a DHCPv6 server. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 123: Network [N] Qos Diffserv Audio
Set the priority of the video packets in the IP network. 0 means "best-effort". Set the priority of the signalling packets in the IP network. 0 means "best-effort". D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 124: Network [N] Qos Diffserv Icmpv6
100half: Force link to 100 Mbps half-duplex. 100full: Force link to 100 Mbps full-duplex. 1000full: Force link to 1 Gbps full-duplex. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 125: Network [N] Trafficcontrol Mode
Default value: Auto Value space: Auto/Manual/Off Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If CDP is not available, VLAN is not enabled. Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If CDP is available, the manually set value will be overruled by the value assigned by CDP.
Page 126: Networkservices Settings
NetworkServices CDP Mode NetworkServices HTTP Mode Enable or disable the CDP (Cisco Discovery Protocol) daemon. Enabling CDP will make the Define whether or not to allow access to the device using the HTTP or HTTPS (HTTP device report certain statistics and device identifiers to a CDP-enabled switch. If CDP is Secure) protocols.
Page 127: Networkservices Http Proxy Mode
HttpClient UseHttpProxy, HttpFeedback UseHttpProxy, and WebEngine UseHttpProxy settings. Value space: String (0..255) Communication with the Cisco Webex cloud will always go via the proxy if NetworkServices The URL of the PAC (Proxy Auto Configuration) script. HTTP Proxy Mode is not turned Off.
Page 128: Networkservices Https Ocsp Url
Off: The HTTP strict transport security feature is disabled. On: The HTTP strict transport security feature is enabled. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 129: Networkservices Ntp Server [N] Address
ReadOnly: Enable the SNMP network service for queries only. ReadWrite: Enable the SNMP network service for both queries and commands. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 130: Networkservices Snmp Communityname
Requires user role: ADMIN SNMP agent in the video device will not send a response. Default value: On If you have the Cisco TelePresence Management Suite (TMS) you must make sure the same SNMP community is configured there. Value space: Off/On Requires user role: ADMIN, INTEGRATOR Off: The SSH protocol is disabled.
Page 131: Networkservices Upnp Mode
Requires user role: ADMIN Default value: 600 Value space: Integer (0..3600) Range: Select a value between 0 and 3600 seconds. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 132: Networkservices Wifi Allowed
Requires user role: ADMIN, USER Default value: True Value space: False/True False: Wi-Fi is disabled. True: Wi-Fi is enabled. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 133: Peripherals Settings
Define whether or not to allow the use of a third-party input device, such as a USB In order to use Cisco Touch 10 (touch panel) as user interface for the video conferencing keyboard or a wireless remote control with a USB dongle. The input device must advertise device, Touch 10 must be either directly connected to the device or paired to the device via itself as a USB keyboard.
Page 134: Peripherals Profile Controlsystems
Define if a third-party control system, for example Crestron or AMX, is expected to Define the number of Cisco Touch controllers that are expected to be connected to the be connected to the video conferencing device. This information is used by the video device.
Page 135: Phonebook Settings
100. Enabled: The phonebook server supports pagination. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 136: Phonebook Server [N] Type
CUCM: The phonebook is located on the Cisco Unified Communications Manager. Spark: The phonebook is located in the Cisco Webex cloud service. TMS: The phonebook is located on the Cisco TelePresence Management Suite server. VCS: The phonebook is located on the Cisco TelePresence Video Communication Server.
Page 137: Provisioning Settings
Support for CUCM Call Management Records. This feature is experimental in this software Provisioning ExternalManager AlternateAddress version. Only applicable when the device is provisioned by Cisco Unified Communication Manager Requires user role: ADMIN, USER (CUCM) and an alternate CUCM is available for redundancy. Define the address of the alternate CUCM.
Page 138: Provisioning Externalmanager Domain
Expressway the encryption option key must be installed on the device. Manager address. Webex: Push configurations to the device from the Cisco Webex cloud service. In order to register to the Webex cloud service, the encryption option key must be installed on Requires user role: ADMIN, USER the device.
Page 139: Provisioning Password
On. The certificate check is always performed, regardless of this setting, if the device is provisioned from the Cisco Webex cloud service or from CUCM via Expressway (also known as MRA or Edge). Requires user role: ADMIN, USER...
Page 140: Proximity Settings
Enable or disable basic call control features on Cisco collaboration clients. When this setting is enabled, you are able to control a call using a Cisco collaboration client (for example dial, mute, adjust volume and hang up). This service is supported by mobile devices (iOS and Android).
Page 141: Proximity Services Contentshare Fromclients
Enable or disable content sharing from Cisco collaboration clients. When this setting is enabled, you can share content from a Cisco collaboration client wirelessly on the device, e.g. share your laptop screen. This service is supported by laptops (OS X and Windows).
Page 142: Roomanalytics Settings
On: The device counts people as long as the device is not in standby mode. This includes outside of call, even if self-view is off. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 143: Roomcleanup Settings
Default value: 0 Value space: Integer (0..23) The hour of the day at which the room cleanup will occur. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 144: Roomreset Settings
Off: No RoomReset events will be sent. On: The room reset control is enabled and RoomReset events will be sent. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 145: Rtp Settings
Set the last port in the range of RTP ports. The value must be an odd number. If you enter an even value, +1 will be automatically applied. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 146: Security Settings
Ignore: The device will continue its normal operation, and rotate internal logs when full. When the connection is restored it will again send its audit logs to the syslog server. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 147: Security Audit Server Portassignment
On: The device is in FIPS mode. Set the maximum number of failed login attempts per user. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 148: Security Session Maxsessionsperuser
Value space: Off/On On: Show information about the last session. Off: Do not show information about the last session. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 149: Serialport Settings
Off: The user can access the device via the serial port without any login. On: Login is required when connecting to the device via the serial port. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 150: Sip Settings
This is the password part of the credentials used to authenticate towards the SIP proxy. Requires user role: ADMIN Default value: "" Value space: String (0, 128) A valid password. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 151: Sip Ice Defaultcandidate
The ICE protocol needs some time to reach a conclusion about which media route to use When registered to a Cisco Unified Communications Manager (CUCM) the device may be (up to the first 5 seconds of a call). During this period media for the device will be sent to part of a shared line.
Page 152: Sip Mailbox
SIP Proxy [n] Address n: 1..4 When registered to a Cisco Unified Communications Manager (CUCM) you may be offered the option of having a private voice mailbox. The Proxy Address is the manually configured address for the outbound proxy. It is possible to use a fully qualified domain name, or an IP address.
Page 153: Sip Turn Discovermode
Default value: Standard SIP Turn Server Value space: Standard/Cisco Standard: Use this when registering to standard SIP Proxy (tested with Cisco Define the address of the TURN (Traversal Using Relay NAT) server. It is used as a media TelePresence VCS).
Page 154: Sip Uri
Default value: "" Value space: String (0..255) An address (URI) that is compliant with the SIP URI syntax. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 155: Standby Settings
Requires user role: ADMIN, INTEGRATOR Default value: 10 Value space: Integer (1..480) Set the standby delay (minutes). D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 156: Standby Wakeupaction
PrivacyPosition: When the video conferencing device enters standby, the camera turns to a sideways position for privacy. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 157: Systemunit Settings
If the device crashes, the device can automatically send logs to the Cisco Automatic Crash and when the device is acting as an SNMP Agent. Report tool (ACR) for analyses. The ACR tool is for Cisco internal usage only and not available to customers.
Page 158: Time Settings
MM_DD_YY: The date January 30th 2010 will be displayed: 01.30.10 YY_MM_DD: The date January 30th 2010 will be displayed: 10.01.30 D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 159: Time Zone
Newfoundland, Canada/Pacific, Canada/Saskatchewan, Canada/Yukon, Chile/Continental, Menominee, America/Merida, America/Metlakatla, America/Mexico_City, America/ Chile/EasterIsland, Cuba, EET, EST, EST5EDT, Egypt, Eire, Etc/GMT, Etc/GMT+0, Etc/GMT+1, D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 160 Starke, US/Michigan, US/Mountain, US/Pacific, US/Samoa, UTC, Universal, W-SU, WET, Zulu Select a time zone from the list. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 161: Userinterface Settings
Off: Webex Assistant is switched off. On: Webex Assistant can be used if it is supported by the infrastructure. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 162: Userinterface Branding Awakebranding Colors
SystemName: Show the device's name (refer to the SystemUnit Name setting). DisplayName: Show the device's display name (refer to the SIP DisplayName setting). D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 163: Userinterface Features Call End
Hidden: Removes the default buttons from the user interface. Hidden: Removes the default button from the user interface. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 164: Userinterface Features Call Videomute
Auto: Shows the default buttons and UI elements in the user interface. Hidden: Removes the default buttons and UI elements from the user interface. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 165: Userinterface Osd Halfwakemessage
1-3: The device sends the on-screen information and indicators to the specified output. Choose n to send the on-screen information and indicators to the device's Output Connector n. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 166: Userinterface Security Mode
Value space: Locked/Unlocked Locked: Authentication with administrator's username and passphrase is required. Unlocked: No authentication is required. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 167: Userinterface Wallpaper
Requires user role: ADMIN Default value: On Value space: Off/On On: Enables activity indicators. Off: Disables activity indicators. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 168: Usermanagement Settings
STARTTLS: Connect to the LDAP server on port 389, then send a STARTTLS command to upgrade to an encrypted connection (TLS). D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 169: Usermanagement Ldap Minimumtlsversion
Default value: Off Value space: Off/On Off: LDAP authentication is not allowed. On: LDAP authentication is allowed. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 170: Usermanagement Passwordpolicy Complexity Minimumdigits
The minimum number of characters. 0 means no restrictions. Value space: Integer (0..4) The minimum number of special characters. 0 means no restrictions. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 171: Usermanagement Passwordpolicy Complexity Minimumuppercase
Requires user role: ADMIN Default value: 0 Value space: Integer (0..7300) The minimum number of days. 0 means no restrictions. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 172: Video Settings
LowerLeft: The active speaker PiP will appear in the lower left corner of the screen. switched. LowerRight: The active speaker PiP will appear in the lower right corner of the screen. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 173: Video Defaultlayoutfamily Remote
Requires user role: ADMIN, USER Default value: 1 Value space: 1/2/3/4 The default source for main video. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 174: Video Input Connector [N] Cec Mode
ConnectedDevice CEC [n]), provided that the connected device also supports CEC. Default value: Connector 1,2,6: camera Connector 3,4,5: PC If you have Cisco Quad Camera, do not switch off CEC on that connector because then Value space: PC/camera/document_camera/mediaplayer/whiteboard/other there will be no sound on the speakers on the camera. CEC is required for HDMI ARC (Audio Return Channel), which is the channel used for sending audio from the video PC: Use this when a computer is connected to the video input.
Page 175: Video Input Connector [N] Optimaldefinition Profile
2560_1440_60: The resolution is 2560 x 1440, and the refresh rate is 60 Hz. 3840_2160_30: The resolution is 3840 x 2160, and the refresh rate is 30 Hz. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 176: Video Input Connector [N] Rgbquantizationrange
Limited: Limited Quantization Range. R, G, B quantization range that excludes some code values at the extremes (16 - 235). This is defined in CEA-861-E. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 177: Video Input Connector [N] Visibility
Third. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 178: Video Output Connector [N] Location Horizontaloffset
"." characters are discarded, and the decimal point is ".". D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 179: Video Output Connector [N] Monitorrole
The formats larger than 1920_1200_60 requires use of high quality display cables. For outputs define which layout (video streams) will be shown on each screen. guaranteed operation, use display cables that are pre-qualified from Cisco for use at 3840_2160_60, or use a cable that has passed the "Premium HDMI certification" program.
Page 180: Video Output Connector [N] Rgbquantizationrange
LowerLeft: The presentation PiP will appear in the lower left corner of the screen. LowerRight: The presentation PiP will appear in the lower right corner of the screen. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 181: Video Selfview Default Fullscreenmode
LowerLeft: The self-view PiP will appear in the lower left corner of the screen. LowerRight: The self-view PiP will appear in the lower right corner of the screen. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 182: Video Selfview Oncall Duration
Range: Choose for how long self-view remains on. The valid range is between 1 and 60 seconds. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 183: Webengine Settings
Off: Set up communication directly with the server (not using a proxy). On: Set up communication via proxy. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 184: Webex Settings
Value space: Off/On Off: The linked device uses on-premises proximity mode. On: The linked device uses cloud proximity mode. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 185: Webrtc Settings
Webex cloud service. Requires user role: ADMIN Default value: 2 Value space: Integer (0..600) The period in seconds. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 186: Experimental Settings
Experimental settings The Experimental settings are for testing only and should not be used unless agreed with Cisco. These settings are not documented and WILL change in later releases. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Page 187: Appendices
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide  Introduction Configuration Peripherals Maintenance Device settings Appendices Appendices Appendices D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 188: How To Use Touch 10
Press the Microphone the right side to increase button to mute and unmute the volume. microphones. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 189: Panoramic Video
Video from the camera's right and left telelenses are stitched together to create the wide panorama view. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 190: Set Up Remote Monitoring
REGULATIONS WHEN USING THE DEVICE AND CISCO DISCLAIMS ALL LIABILITY FOR ANY UNLAWFUL USE OF THIS FEATURE. Automatically refresh snapshots D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 191: Access Call Information And Answer A Call While Using The Web Interface
If the device is idle, there is no call indicator. Put the call on hold Answer the call Disconnect the call D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 192: Place A Call Using The Web Interface
When searching, matching entries from the Favorites, Directory and Recents click the button for that participant. lists will be shown as you type. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 193 Then the text changes to Microphone: Off. Click Microphone: Off to unmute. Volume down Volume up D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 194: Share Content Using The Web Interface
Shows snapshots of the selected presentation source. Only available on devices that have the Remote Monitoring option. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 196: Control A Far End Camera
If the call is encrypted, the far end snapshot behind the controls are not displayed. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 197: Room Analytics
This includes outside of call, even if self-view is off. Sign in to the web interface and navigate to Setup > Configuration > RoomAnalytics > PeopleCountOutOfCall. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 198 Sign in to the web interface and navigate to Setup > Configuration > RoomAnalytics > AmbientNoiseEstimation > Mode. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 199: Customize The Video Conferencing Device's Touch 10 User Interface
You can customize the user interface to allow control of peripherals in a meeting room, for example lights and blinds, or You need a Cisco video conferencing device with a Touch 10 to modify the video conferencing device’s behavior by triggering controller, and a control system.
Page 200 UI Extensions editor and the API commands that you need when programming. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 201: Customize The Video Conferencing Device's Behavior Using Macros
You need a user that holds the ADMIN user role in order to access the Macro editor. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 202: Remove Default Buttons From The User Interface
You can share content using Proximity, even if you have removed the Share button from the user interface. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 203: Use Of A Third-Party Usb Input Device
UserInterface > Peripherals > ConnectedDevice status. The input device may be reported as multiple devices. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 204: Sending Http(S) Requests
Further information Find more information about HTTP(S) Post requests in the Customization guide. Go to: ► https://www.cisco.com/go/in-room-control-docs D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 205: Digital Signage
NetworkServices > HTTP Proxy Additionally, this setting must be On: WebEngine > UseHttpProxy D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 206: Api-Driven Web Views
NetworkServices > HTTP Proxy Additionally, this setting must be On: WebEngine > UseHttpProxy D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 207: Input Source Composition
Lower right corner, large PIP Note that Panorama devices use two input sources for the main camera. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 208 The size of the PIP can be normal (auto) or large. Refer to the API-guide for more details. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 209: Presentation Source Composition
(UI extension) for it. Number of sources: 2 Note that Panorama devices use two input sources for the main camera. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 210 Refer to the API-guide for more details. xCommand Presentation Start PresentationSource: 1 PresentationSource: 2 PresentationSource: 3 Layout: Prominent D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 211: Manage Startup Scripts
1. Select the startup script from the list. a starting point for editing, select that script and click Copy. 2. Click Delete. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 212: Access The Device's Xml Files
• Valuespace.xml contains an overview of all the value spaces of device settings, status information, and commands. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 213: Execute Api Commands And Configurations From The Web Interface
1. Enter a command (xCommand or xConfiguration), or a sequence of commands, in the text area. 2. Click Execute to issue the command(s). D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 214: Advanced Customization Of Audio
We also recommend you to read the and local reinforcement chapter for more information about a good auditory experience. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 215: Connector Panel, Room Panorama Codec
L. 3 × HDMI inputs with audio and video (Connector 3-5), 4Kp30 M. Camera input (3G-SDI / HD-SDI, Connector 6), 1080p60, Level A only, HD-BNC, 75 Ω D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 216: Connector Panel, Room Panorama Amplifier
Appendices Appendices Connector panel, Room Panorama amplifier The Cisco Natural Audio Module IV is an essential component of Room Panorama. It is a 16 channel audio power amplifier with Ethernet and analog inputs. 12V Power input and output Factory reset...
Page 217: Connector Panel, Room 70 Panorama
U. Ethernet PoE - Internal network port for PoE device V. Touch panel (user interface, Ethernet PoE) W. Status LED X. Power output to codec D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 218: About Ethernet Ports
MX700 / MX800 • A non-Cisco device can be assigned a static IP address in the range: 169.254.1.241 to 169.254.1.254 DX70 / DX80 This method can also be used to connect to the codec with SSH.
Page 219: Audio Inputs And Outputs
4 (microphone mute) is not used. Audio outputs The audio outputs are configured for the use of Euroblock connectors with 3 ports. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 220 < -100 dB • 46 dB input gain, -23 dBu signal level, 10 kHz: < -110 dB D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 221: Gpio Connector
API guide for CE software. Go to com/go/room-docs The numbering of the four GPIO pins are opposite compared to SX80, MX700, and MX800. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 222: Api Access Using The Com Port
115200 bps. Don't use the COM port for maintenance; use the micro-USB port instead. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 223: Serial Interface For Maintenance
You need a CP210x USB to UART Bridge Virtual COM Port (VCP) driver, see ► http://www.silabs.com/products/development-tools/software/usb-to-uart- bridge-vcp-drivers D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 224: Open Tcp Ports
You can close the port by setting remote pairing for the Touch panel to Off. Peripherals Pairing CiscoTouchPanels RemotePairing: Off / On D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 225 You can close the ports by setting the SIP listen ports to Off. NetworkServices UPnP Mode: Off D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 226: Httpfeedback Address From Tms
TMS (scheduled or triggered by the TMS administrator). D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 227: Link An On-Premises Registered Device To Cisco Webex Edge For Devices
Device settings Appendices Appendices Link an on-premises registered device to Cisco Webex Edge for Devices You can use Webex Edge for Devices to link your on-premises registered devices to the Webex cloud service. This gives you access to select cloud features, while your registration, device...
Page 228: Register A Device To The Cisco Webex Cloud Service
Appendices Register a device to the Cisco Webex cloud service Limitations You can register a device to Cisco Webex remotely from the web 1. Sign in to the web interface, and click Click here to register to interface instead of using the on-screen setup assistant.
Page 229: Supported Rfcs
Extensions to Session Traversal Utilities for NAT (STUN) • RFC 5905 Network Time Protocol Version 4: Protocol and Algorithms Specification D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 230: Calculating Minimum Bandwidth
For example, if there is a minimum bandwidth of 768 kbps for the resolution 720p30. Then, the dual-stream minimum bandwidth will be 768 × 2, or 1536 kbps. D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 231: Technical Specification For Room Panorama
• Consumer Electronics Control (CEC) 2.0 • Up to 16 Mbps point to point • Cisco Webex apps (up to 3840 × 2160 at 5 fps) • Cisco Proximity (up to 1920 × 1080 at 5 fps) D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Page 232 All images in these materials are for representational purposes only, actual products may differ. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners.
Page 233: Technical Specification For Room 70 Panorama
Using two telelenses simultaneously • Video stream: Supports resolutions up to cable and power cable • Cisco Webex apps (up to 3840 × 2160 at 5 fps) • Auto-framing using audio and face detection 1920 × 1080 at 60 fps (HD1080p60) •...
Page 234 Power consumption under normal operating conditions as defined in IEC 60950-1 October 2020 D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 235: User Documentation On The Cisco Web Site
LEDs Software Downloads, Release and General Information > Release Notes • Software release notes D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Page 236: Cisco Contacts
Cisco website at www.cisco.com/go/offices. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/ or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.

This manual is also suitable for:

Webex room 70 panorama

Cisco Webex Room Panorama Administrator's Manual

Table of Contents

Overview of the Device Settings

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for Cisco Webex Room Panorama

Summary of Contents for Cisco Webex Room Panorama