Video Output Connector [N] Monitorrole; Video Output Connector [N] Resolution - Cisco Webex Room Panorama Administrator's Manual

Cisco Webex Room Panorama and Room 70 Panorama

Introduction

Video Output Connector [n] MonitorRole

n: 1..3
The monitor role describes which video streams will be shown on the screen connected to
this video output. Together the Video Monitors setting and the MonitorRole settings for all
outputs define which layout (video streams) will be shown on each screen.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
Value space: Auto/First/Second/Third/PresentationOnly/Recorder
Auto: The device will detect when a screen is connected, and a monitor role (First,
Second, Third) that corresponds with the Video Monitors setting will be assigned
automatically.
First/Second/Third: Define the role of the screen in a multi-screen setup. In a single-
screen setup, there is no difference between First, Second and Third.
PresentationOnly: Show presentation video stream if active, and nothing else. Screens/
outputs with this monitor role are disregarded by the Video Monitors setting.
Recorder: Show all participants, including the local main video (self-view). If active, also
show the presentation. Screens/outputs with this monitor role are ignored by the Video
Monitors setting.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance

Video Output Connector [n] Resolution

n: 1..3
Define the resolution and refresh rate for the connected screen.
The formats larger than 1920_1200_60 requires use of high quality display cables. For
guaranteed operation, use display cables that are pre-qualified from Cisco for use at
3840_2160_60, or use a cable that has passed the "Premium HDMI certification" program.
Some UHD TVs/displays only enable 3840_2160_30 (30 Hz) and not 3840_2160_60
(60 Hz) as their default configuration. In such cases the corresponding setting on the TV/
display must be reconfigured to allow 3840_2160_60 for the HDMI input where the device
is connected.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: Connector 1, 2: Auto; Connector 3: 3840_2160_30
Value space: Connector 1,2: Auto/1920_1080_50/1920_1080_60/1920_1200_50/1920_12
00_60/2560_1440_60/3840_2160_30/3840_2160_60 Connector 3: 3840_2160_30
Auto: The device will automatically try to set the optimal resolution based on negotiation
with the connected monitor.
1920_1080_50: The resolution is 1920 x 1080, and the refresh rate is 50 Hz.
1920_1080_60: The resolution is 1920 x 1080, and the refresh rate is 60 Hz.
1920_1200_50: The resolution is 1920 x 1200, and the refresh rate is 50 Hz.
1920_1200_60: The resolution is 1920 x 1200, and the refresh rate is 60 Hz.
2560_1440_60: The resolution is 2560 x 1440, and the refresh rate is 60 Hz.
3840_2160_30: The resolution is 3840 x 2160, and the refresh rate is 30 Hz.
3840_2160_60: The resolution is 3840 x 2160, and the refresh rate is 60 Hz.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
179
Administrator Guide
Device settings Device settings Appendices