Set Up The Speakertrack Feature - Cisco Webex Room Panorama Administrator's Manual

Cisco Webex Room Panorama and Room 70 Panorama

Introduction

Set up the SpeakerTrack feature

Sign in to the web interface and navigate to
to find the settings referred.
Note: In Panoramic video scenarios, the 2-camera panoramic
view cannot be switched off. In this case speaker tracking is not
enabled.
In all other scenarios, speaker tracking works and can be
configured as described here.
The speaker track feature uses automatic camera framing to
select the best view based on how many people are in the room.
When closeup is enabled and a person in the room speaks, the
device will find the person and select the best camera framing.
The closeup may not include all the persons in the room. If you
want all the persons in the room to be in the picture at all times
you must turn off the closeup functionality.
Best overview
The camera uses digital face detection to automatically create the
best view of a single person or a group of people in the room. If
people are moving around in the room or additional participants
enters the room, the feature will adopt to the changes and
automatically adjust the view to include all persons in the picture.
This feature works together with speaker tracking to provide the
best possible conferencing experience.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Peripherals
Configure speaker tracking
Setup > Configuration,
Use the Cameras > SpeakerTrack
tracking.
Cameras > SpeakerTrack > Mode
Auto: Speaker tracking is enabled in general. The device will
detect people in the room and automatically select the best
camera framing. Users can switch speaker track on or off
instantly from the camera control panel in the user interface.
Off: Speaker tracking is switched off, and it is not possible to
switch it on from the user interface.
Cameras > SpeakerTrack > Closeup
This setting only applies when the Cameras SpeakerTrack Mode
is set to Auto.
Auto: The behavior depends on the device type. Boards
will keep all the persons in the room in the camera framing
at all times, while other devices will zoom in on the person
speaking.
Off: The device will keep all the persons in the room in the
camera framing at all times.
On: The device will zoom in on the person speaking.
Maintenance
settings to configure speaker
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
54
Administrator Guide
Device settings Appendices
Products that support
speaker tracking
The following Cisco products support
speaker tracking:
• MX700 and MX800 with dual camera
• SX80 with SpeakerTrack 60 camera
or Quad camera
• Room Kit
• Codec Plus with Quad Camera (Room
Kit Plus) or SpeakerTrack 60 camera
• Codec Pro with Quad Camera (Room
Kit Pro) or SpeakerTrack 60 camera
• Room 55
• Room 55 Dual
• Room 70
• Room 70 G2
• Room Panorama
• Room 70 Panorama
• Boards