Add Corporate Branding To The Screen And Touch 10 User Interface - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set

Introduction

Add corporate branding to the screen and Touch 10 user interface

Sign in to the web interface, and navigate to
Personalization, and open the Branding
From this page you can add your own branding elements
(background brand image, logo, custom message) to the video
system.
Branding in the awake state
In the awake state you can:
• Add a logo in the bottom right corner (screen and Touch 10)
• Add a short message (text only) in the bottom left corner (only
on screen, not on Touch 10)
Custom text
Logo
We recommend:
• A black logo (the video system will add a white overlay with 40% opacity
so that the logo and the other user interface elements go well together)
• PNG-format with transparent background
• Minimum 272×272 pixels (it will be scaled automatically)
D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration Configuration
Setup >
tab.
Peripherals Maintenance
41
Administrator Guide
System settings
(page 1 of 2)
About Branding
The Branding feature, as describe in
this chapter, allows you to customize
the screen and Touch user interface
appearence without compromising
the overall Cisco user experience. The
feature is also available if you control the
video system with a remote control.
We recommend that you use this feature
rather than our legacy Custom wallpaper
feature, which prevents the use of
functionality such as One Button to Push.
You cannot use the Branding feature
and a Custom wallpaper at the same
time.
If your video system is set up with a
Custom wallpaper, you must click
the custom wallpaper
branding elements.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
Appendices
Disable
before adding