Conference Maxtotaltransmitcallrate; Conference Micunmuteondisconnect Mode; Conference Multipoint Mode - Cisco Webex Room Panorama Administrator's Manual

Cisco Webex Room Panorama and Room 70 Panorama

Introduction

Conference MaxTotalTransmitCallRate

This configuration applies when using a device's built-in MultiSite feature (optional) to host a
multipoint video conference.
Define the maximum overall transmit bit rate allowed. The bit rate will be divided fairly
among all active calls at any time. This means that the individual calls will be up-speeded or
down-speeded as appropriate when someone leaves or enters a multipoint conference, or
when a call is put on hold (suspended) or resumed.
The maximum transmit bit rate for each individual call is defined in the Conference
MaxTransmitCallRate setting.
Requires user role: ADMIN
Default value: 20000
Value space: Integer (64..20000)
The maximum transmit call rate (kbps).

Conference MicUnmuteOnDisconnect Mode

Define if the microphones shall be unmuted automatically when all calls are disconnected.
In a meeting room or other shared resources this may be done to prepare the device for the
next user.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: If muted during a call, let the microphones remain muted after the call is
disconnected.
On: Unmute the microphones after the call is disconnected.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance

Conference Multipoint Mode

Define how to expand a point-to-point video call (a call involving only two parties) into
a multipoint conference with more participants (ad hoc conferences). Both the built-in
MultiSite feature, which relies only on local resources, and different solutions based on
centralized infrastructure (multipoint control units – MCUs) are available.
The MultiSite feature is an upgrade option and may not be available on all devices. The
MultiSite option key must be installed on the device.
If registered to a Cisco TelePresence Video Communication Server (VCS), the device
can use MultiSite when calling other video devices. If registered to a Cisco Unified
Communications Manager (CUCM) version 8.6.2 or newer, the device can use either a
CUCM conference bridge, or the device's own built-in MultiSite feature. Which option to
use, is set-up by CUCM.
In either case, multiparty conferences may be set up via an MCU if you call an MCU that
allows devices to add participants to a conference (Direct Remote Add).
Requires user role: ADMIN
Default value: Auto
Value space: Auto/CUCMMediaResourceGroupList/MultiSite/Off
Auto: The multipoint method is selected automatically.
Multiparty conferences are set up using the built-in MultiSite feature, provided that
the MultiSite option key is installed on the device, and that you are calling another
video device (not an MCU). Only the MultiSite host can add participants. This prevents
cascaded conferences. If the device doesn't have the MultiSite option key, you cannot
call more than one video device on video. You may add one extra participant on audio-
only.
Regardless of the MultiSite option key, multiparty conferences may be set up via an MCU
if you call an MCU that allows devices to add participants to a conference (Direct Remote
Add).
CUCMMediaResourceGroupList: Multiparty conferences are hosted by the CUCM
configured conference bridge. This setting is provisioned by CUCM in a CUCM
environment, and should never be set manually by the user.
MultiSite: Multiparty conferences are set up using the built-in MultiSite feature, provided
that the MultiSite option key is installed on the device. If the device doesn't have the
MultiSite option key, you cannot call more than one device on video. You may add one
extra device on audio-only.
Off: You cannot call more than one device on video, but you may add one extra device
on audio-only. Multiparty conferences may be set up via an MCU if you call an MCU that
allows devices to add participants to a conference (Direct Remote Add).
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
106
Administrator Guide
Device settings Device settings Appendices