Networkservices Snmp Communityname; Networkservices Snmp Systemcontact; Networkservices Snmp Systemlocation; Networkservices Ssh Allowpublickey - Cisco Webex Room Panorama Administrator's Manual

Cisco Webex Room Panorama and Room 70 Panorama

Introduction

NetworkServices SNMP CommunityName

Define the name of the SNMP community. The SNMP community name is used to
authenticate SNMP requests. If an SNMP request from a management system does not
include a matching community name (case sensitive), the message is dropped and the
SNMP agent in the video device will not send a response.
If you have the Cisco TelePresence Management Suite (TMS) you must make sure the same
SNMP community is configured there.
Requires user role: ADMIN, INTEGRATOR
Default value: ""
Value space: String (0, 50)
The SNMP community name.

NetworkServices SNMP SystemContact

Define contact information that SNMP servers can use.
Requires user role: ADMIN, INTEGRATOR
Default value: ""
Value space: String (0, 50)
String that describes the contact information for the video device.

NetworkServices SNMP SystemLocation

Define location information that SNMP servers can use.
Requires user role: ADMIN, INTEGRATOR
Default value: ""
Value space: String (0, 50)
String that describes the location of the video device.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance

NetworkServices SSH Mode

The SSH (or Secure Shell) protocol can provide secure encrypted communication between
the video conferencing device and your local computer.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The SSH protocol is disabled.
On: The SSH protocol is enabled.

NetworkServices SSH HostKeyAlgorithm

Choose the cryptographic algorithm that shall be used for the SSH host key. Choices
are RSA (Rivest–Shamir–Adleman) with 2048 bits keysize, ECDSA (Elliptic Curve Digital
Signature Algorithm) with NIST curve P-384, and EdDSA (Edwards-curve Digital Signature
Algorithm) with ed25519 signature schema.
Requires user role: ADMIN
Default value: RSA
Value space: ECDSA/RSA/ed25519
ECDSA: Use the ECDSA algorithm (nist-384p).
RSA: Use the RSA algorithm (2048 bits).
ed25519: Use the ed25519 algorithm.

NetworkServices SSH AllowPublicKey

Secure Shell (SSH) public key authentication can be used to access the device.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The SSH public key is not allowed.
On: The SSH public key is allowed.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
130
Administrator Guide
Device settings Device settings Appendices