Add Corporate Branding To The Screen - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

Add corporate branding to the screen

Sign in to the web interface, navigate to
and open the Branding tab.
From this page you can add your own branding elements
(background brand image, logo, custom message) to the video
conferencing device.
Branding in the awake state
In the awake state you can:
• Add a logo in the bottom right corner
• Add custom text in the bottom left corner
Custom text
Logo
We recommend:
• A black logo (the device will add a white overlay with 40% opacity so that
the logo and the other user interface elements go well together)
• PNG-format with transparent background
• Minimum 272×272 pixels (it will be scaled automatically)
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Configuration
(page 1 of 2)
Setup > Personalization,
Peripherals Maintenance
47
Administrator Guide
Device settings
About Branding
The Branding feature, as described in
this chapter, allows you to customize
the screen appearance without
compromising the overall Cisco user
experience.
We recommend that you use this feature
rather than our legacy Custom wallpaper
feature, which prevents the use of
functionality such as One Button to Push.
You cannot use the Branding feature
and a Custom wallpaper at the same
time.
If your device is set up with a Custom
wallpaper, you must click
custom wallpaper before adding branding
elements.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Appendices
Disable the