Table of Contents
Advertisement
Cisco Webex Room Panorama and Room 70 Panorama
Introduction
Logging settings
Logging CloudUpload Mode
Specify whether or not logs from the device can be uploaded to the Webex cloud service.
The device logs will be filtered for personally-identifiable information before they are sent to
the cloud.
When enabled, the log upload can be initiated from the device itself or from Control Hub.
The device will display a "Send logs" button on the user interface, and there will be a
"Manage Logs" section on the Devices page in Control Hub.
The device must either be registered to the Webex cloud service or registered to an on-
premises service and linked to Webex Edge for Devices.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: Logs from the device can not be uploaded to the Webex cloud.
On: Logs from the device can be uploaded to the Webex cloud.
Logging Debug Wifi
When this option in enabled, the device logs more information about the set-up and
maintenance of the Wi-Fi connection between the device and the access point. This may
be useful when you are troubleshooting Wi-Fi connection issues. We recommend that this
setting is Off if the Wi-Fi connection is working as expected.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Logging only basic Wi-Fi information.
On: Logging a large amount of information about the Wi-Fi connection.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
Maintenance
Logging External Mode
Specify whether or not to store the device logs on a remote syslog server. This setting has
no effect if the Logging Mode setting is set to Off.
You must enter the address of the remote server in the Logging External Server Address
setting. Unless otherwise specified in the Logging External Server Port setting, the standard
syslog port is used.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: Device logs will not be stored on the remote syslog server.
On: Device logs will be stored on the remote syslog server.
Logging External Protocol
Specify which protocol to use toward the remote logging server. You can use either the
syslog protocol over TLS (Transport Layer Security), or the syslog protocol in plaintext. For
details about the syslog protocol, see RFC 5424.
Requires user role: ADMIN
Default value: SyslogTLS
Value space: Syslog/SyslogTLS
Syslog: Syslog protocol in plain text.
SyslogTLS: Syslog protocol over TLS.
Logging External Server Address
Specify the address of the remote syslog server.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 255)
A valid IPv4 address, IPv6 address or DNS name.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
115
Administrator Guide
Device settings
Device settings
Appendices
Advertisement
Chapters
Table of Contents
