Audio Settings; Audio Defaultvolume; Audio Input Arc [N] Mode; Audio Input Hdmi [N] Level - Cisco Webex Room Panorama Administrator's Manual

Cisco Webex Room Panorama and Room 70 Panorama

Introduction
Software version: CE9.14 Product: Room Panorama and Room 70 Panorama

Audio settings

Audio DefaultVolume

Define the default volume for the speakers. The volume is set to this value when you switch
on or restart the video conferencing device. Use the controls on the user interface to
change the volume while it is running. You may also use API commands (xCommand Audio
Volume) to change the volume while the device is running, and to reset to default value.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: 50
Value space: Integer (0..100)
Range: Select a value between 1 and 100. This corresponds to the dB range from -34.5
dB to 15 dB, in steps of 0.5 dB. If set to 0 the audio is switched off.

Audio Input ARC [n] Mode

n: 3..3
Each HDMI output has an associated audio return channel (ARC). You can use the ARC
to send audio from a screen or TV, which is connected to the HDMI ouput, to the video
conferencing device. You can decide for each HDMI output connector (n) separately,
whether or not to allow audio transmission.
Requires user role: ADMIN, INTEGRATOR
Default value: On
Value space: Off/On
Off: Disable the ARC channel of HDMI output n (audio is not sent to the video
conferencing device).
On: Enable the ARC channel of HDMI output n (audio is sent to the video conferencing
device).
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance

Audio Input HDMI [n] Level

n: 2..5
Set the gain on the HDMI input connector. The gain can be tuned in steps of 1 dB.
Requires user role: ADMIN, INTEGRATOR
Default value: 0
Value space: Integer (-24..0)
Range: Select the gain in decibel (dB).

Audio Input HDMI [n] Mode

n: 2..5
Define if the audio on the HDMI input connector shall be enabled.
Requires user role: ADMIN, INTEGRATOR
Default value: On
Value space: Off/On
Off: Disable audio on the HDMI input.
On: Enable audio on the HDMI input.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
88
Administrator Guide
Device settings Device settings Appendices