Table of Contents
Advertisement
Cisco Webex Room Panorama and Room 70 Panorama
Introduction
Video Output Connector [n] RGBQuantizationRange
n: 1..3
Devices connected to an HDMI output should follow the rules for RGB video quantization
range defined in CEA-861. Unfortunately some devices do not follow the standard and this
configuration may be used to override the settings to get a perfect image with any display.
Most HDMI displays expects full quantization range.
Requires user role: ADMIN, INTEGRATOR
Default value: Full
Value space: Auto/Full/Limited
Auto: RGB quantization range is automatically selected based on the RGB Quantization
Range bits (Q0, Q1) in the AVI infoframe. If no AVI infoframe is available, RGB quantization
range is selected based on video format according to CEA-861-E.
Full: Full quantization range. The R, G, B quantization range includes all code values (0 -
255). This is defined in CEA-861-E.
Limited: Limited Quantization Range. R, G, B quantization range that excludes some code
values at the extremes (16 - 235). This is defined in CEA-861-E.
Video Presentation DefaultPIPPosition
Define the position on screen of the presentation picture-in-picture (PiP). The setting only
takes effect when the presentation is explicitly minimized to a PiP, for example using the
user interface. The setting takes effect from the next call onwards; if changed during a call,
it will have no effect on the current call.
Requires user role: ADMIN, INTEGRATOR
Default value: Current
Value space: Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/
LowerLeft/LowerRight
Current: The position of the presentation PiP will be kept unchanged when leaving a call.
UpperLeft: The presentation PiP will appear in the upper left corner of the screen.
UpperCenter: The presentation PiP will appear in the upper center position.
UpperRight: The presentation PiP will appear in the upper right corner of the screen.
CenterLeft: The presentation PiP will appear in the center left position.
CenterRight: The presentation PiP will appear in the center right position.
LowerLeft: The presentation PiP will appear in the lower left corner of the screen.
LowerRight: The presentation PiP will appear in the lower right corner of the screen.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
Maintenance
Video Presentation DefaultSource
Define which video input source to use as a default presentation source. This setting may
be used by the API and third-party user interfaces. It is not relevant when using the user
interfaces provided by Cisco.
Requires user role: ADMIN, USER
Default value: 3
Value space: 1/2/3/4/5
The video input source to use as default presentation source.
Video Presentation Priority
Specify how to distribute the bandwidth between the presentation channel and the main
video channel.
Requires user role: ADMIN
Default value: Equal
Value space: Equal
Equal: The available bandwidth is shared equally between the presentation channel and
the main video channel.
Video RememberLayout
Specify if the last selected video layout should be remembered for personal mode devices.
In personal mode, if the user selects a layout other than the default during a call or meeting,
the last selected layout is applied automatically in the next call or meeting.
Requires user role: ADMIN
Default value: False
Value space: False/True
False: The default layout is applied automatically in every call or meeting.
True: The user's last selected layout is saved and applied in the next call or meeting.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
180
Administrator Guide
Device settings
Device settings
Appendices
Advertisement
Chapters
Table of Contents
