Fpga Mezzanine Card Hpc Interface; Fmc1 Connector; Fmc2 Connector; Fmc3 Connector1 - Xilinx VC7203 User Manual

Table 1-17: CP2103 USB-to-UART Bridge User GPIO
A royalty-free software driver named Virtual COM Port (VCP) is available from Silicon
Laboratories. This driver permits the CP2103 USB-to-UART bridge to appear as a COM
port to the host computer communications application software (for example,
HyperTerminal or TeraTerm). The VCP driver must be installed on the host computer prior
to establishing communications with the VC7203 board.

FPGA Mezzanine Card HPC Interface

Callout 27, 28, and 29,
The VC7203 board features three high pin count (HPC) connectors as defined by the VITA
57.1 FPGA Mezzanine card (FMC) specification. The FMC HPC connector is a 10 x 40
position socket. See
of signal names to pin coordinates.
FMC1 HPC connector JA2 provides connectivity for:
•
•
FMC2 HPC connector JA3 provides connectivity for:
•
•
FMC3 HPC connector JA4 provides connectivity for:
•
•
Note:
available in this density.
Note:
VC7203 GTX Transceiver Characterization Board
UG957 (v1.0) October 10, 2012
U1 FPGA Pin Net Name
B28 USB_GPIO_0
B29 USB_GPIO_1
A31 USB_GPIO_2
A32 USB_GPIO_3
Figure
Appendix B, VITA 57.1 FMC Connector Pinouts
69 differential user defined pairs:
• 34 LA pairs
• 18 HA pairs
• 17 HB pairs
2 differential clocks
80 differential user defined pairs:
• 34 LA pairs
• 24 HA pairs
• 22 HB pairs
4 differential clocks
65 differential user defined pairs:
• 34 LA pairs
• 16 HA pairs
• 15 HB pairs
4 differential clocks
FMC3 is not supported by the XC7V485T device. The IO banks that connect to FMC3 are not
The V voltage on the three FMC HPC connectors tracks VCCO_HP.
ADJ
www.xilinx.com
U26 Pin
19
18
17
16
1-2.
Detailed Description
for a cross-reference
27