Xilinx VC7203 User Manual page 22

Chapter 1: VC7203 Board Features and Operation
Note:
X-Ref Target - Figure 1-10
QUAD_112
QUAD_111
Each GTX Quad and its associated reference clocks (CLK0 and CLK1) are brought out to a
connector pad which interfaces with Samtec BullsEye connectors used with the Samtec
HDR-155805-01-BEYE cable assembly. Contact Samtec, Inc. for information about this or
other cable assemblies.
connector pinout.
22
Figure 1-10 is for reference only and might not reflect the current revision of the board.
QUAD_115
QUAD_114
QUAD_113
Figure 1-10: GTX Quad Locations
Figure 1-11
www.xilinx.com
QUAD_116
QUAD_117
QUAD_118
QUAD_119
A shows the connector pad.
VC7203 GTX Transceiver Characterization Board
UG957_c1_10_100712
Figure 1-11 B shows the
UG957 (v1.0) October 10, 2012