Virtex-7 Fpga; Fpga Configuration; J7 Cables); J211 - Xilinx VC7203 User Manual

Virtex-7 FPGA

The VC7203 board is populated with the Virtex-7 XC7V485T-3 FFG1761E FPGA at U1
(callout 1,
FPGAs Overview.

FPGA Configuration

The FPGA is configured via JTAG using one of the following options:
•
•
•
The VC7203 board comes with an embedded USB-to-JTAG configuration module (U8)
which allows a host computer to access the board JTAG chain using a Standard A to
Micro-B USB cable. Alternately, the FPGA can be configured via System ACE from a Secure
Digital (SD) memory card installed in J211 (see
DIP Switches, page
JTAG chain using one of Xilinx's configuration cables—Platform Cable USB, Platform
Cable USB II or Parallel Cable IV (PCIV).
VC7203 GTX Transceiver Characterization Board
UG957 (v1.0) October 10, 2012
Figure 1-2). For further information on Virtex-7 FPGAs, see DS180, 7 Series
USB JTAG connector (callout 5,
System ACE SD (callout 7,
JTAG cable connector (callout 6,
17). Finally, a JTAG connector (J7) is available to provide access to the
www.xilinx.com
Figure 1-2)
Figure 1-2)
Figure 1-2)
System ACE SD Configuration Address
Detailed Description
15