Table of Contents
Advertisement
4
Villager 4 - Rear Body
Fold-Down Rear Seat Hip Restraint Removal
1.
Remove the screws (1) (Figure 4-48).
2.
Remove the strut angle (2).
3.
Remove the screws (3).
4.
Lift and remove the hip restraint (4).
Fold-Down Rear Seat Hip Restraint Installation
1.
Install the rear hip restraint (4) onto the foot deck (Figure 4-48).
2.
Install the screws (3). Tighten the screws to 4.4 lb·ft (6 N·m).
3.
Install the strut angle (2) on the rear hip restraint.
4.
Install the screws (1). Tighten the screws to 4.4 lb·ft (6 N·m).
Page 4-50
2019 Precedent,Villager 2 and 4 Maintenance and Service Manual
Figure 4-48 Fold-Down Rear Seat Hip Restraint
BODY AND TRIM
Advertisement
Table of Contents
Troubleshooting
