Club Car Precedent Villager 2 2019 Maintenance And Service Manual page 487

Specifi cations
TORQUE SPECIFICATIONS
Throttle Body
Studs
Primary Mounting Nuts
Temperature/Manifold Absolute Pressure (TMAP)
Sensor Fastener
Throttle Position Sensor (TPS) Fastener
Throttle Lever Fastener
Fuel Injector Cap Fastener
Valve Cover
Fastener
CLEARANCE SPECIFICATIONS
Camshaft
Running Clearance
Bore I.D.
New
Max. Wear Limit
Camshaft Bearing Surface O.D.
New
Max. Wear Limit
Cam Lobe Profi le (minimum dimension, measured from
base circle to top of lobe)
Intake - New
Max. Wear Limit
Exhaust - New
Max. Wear Limit
Connecting Rod
Crankpin End I.D. @ 21°C (70°F)
New
Max. Wear Limit
Connecting Rod-to-Crankpin Side Clearance
New
Max. Wear Limit
Connecting Rod-to-Piston Pin Running Clearance
Piston Pin End I.D. @ 21°C (70°F)
New
Max. Wear Limit
4 Values are in Metric units. Values in parentheses are English equivalents.
Lubricate threads with engine oil prior to assembly.
7
12
4,7
4
KohlerEngines.com
ECH440 for Club Car
10 N·m (89 in. lb.)
8.0 N·m (71 in. lb.)
7.3 N·m (65 in. lb.)
1.3 N·m (11.5 in. lb.)
1.3 N·m (11.5 in. lb.)
7.3 N·m (65 in. lb.)
10 N·m (89 in. lb.)
ECH440 for Club Car
0.016/0.052 mm (0.0006/0.0020 in.)
16.000/16.018 mm (0.6299/0.6306 in.)
16.068 mm (0.6326 in.)
15.975 mm (0.6289 in.)
15.90 mm (0.626 in.)
32.286 mm (1.271 in.)
32.032 mm (1.261 in.)
32.506 mm (1.280 in.)
32.252 mm (1.270 in.)
37.020/37.030 mm (1.4575/1.4579 in.)
37.08 mm (1.460 in.)
0.56 mm (0.022 in.)
1.06 mm (0.042 in.)
0.008/0.025 mm (0.0003/0.0010 in.)
20.006/20.017 mm (0.7876/0.7881 in.)
20.03 mm (0.789 in.)
17 690 15 Rev. --