19
Fuel Gauge/Hour Meter
FUEL GAUGE/HOUR METER REMOVAL
1.
Disconnect the battery and spark plug wire.
2.
Remove the instrument panel.
3.
Disconnect the wires from the fuel gauge/hour meter (1) (Figure 19-33, Page 19-30). Do not allow wires to touch.
4.
Alternate pulling the lower and upper tabs away from the gauge housing (2) to remove clip.
5.
Remove the fuel gauge/hour meter from the instrument panel.
FUEL GAUGE/HOUR METER INSTALLATION
1.
Install the fuel gauge/hour meter (1) into the hole in the instrument panel until the flange seats against the
instrument panel (Figure 19-33, Page 19-30).
2.
Install the gauge housing (2).
3.
Connect the wires to the fuel gauge/hour meter (Figure 19-34, Page 19-30).
Pin Description
1. Fuel (-)
Page 19-30
2019 Precedent,Villager 2 and 4 Maintenance and Service Manual
Figure 19-33 Fuel Gauge / Hour Meter
Wire Color
Black
GASOLINE VEHICLE - ELECTRICAL
COMPONENTS