4
Villager 4 - Rear Body
Seat Back Installation
1.
Install the front seat back (1) onto the seat support (2). Make sure the seat support tab (3) is installed in the
front seat back (Figure 4-42).
2.
Install the screws (4). Tighten the screw to 4.4 lb·ft (6 N·m).
3.
Install the rear seat back (5) onto the seat support (6). Make sure the seat support tab (7) is installed in the rear
seat back.
4.
Install the screws (8). Tighten the screw to 4.4 lb·ft (6 N·m).
Page 4-44
2019 Precedent,Villager 2 and 4 Maintenance and Service Manual
Figure 4-42 Seat Back Installation
BODY AND TRIM