4
Villager 4 - Rear Body
FOLD-DOWN REAR SEAT
2+2 fold-down rear seat procedures.
Fold-Down Rear Seat Bottom Removal
1.
Remove the screws (1) (Figure 4-46).
2.
Remove the rear seat bottom (2) from the fold-down hinge (3).
Fold-Down Rear Seat Bottom Installation
1.
Put the rear seat bottom (2) onto the fold-down hinge (3) (Figure 4-46).
2.
Install the screws (1). Tighten the screws to 6.6 lb·ft (9 N·m).
Page 4-48
2019 Precedent,Villager 2 and 4 Maintenance and Service Manual
Figure 4-46 Fold-Down Rear Seat Bottom
BODY AND TRIM