Table of Contents
Advertisement
21
Air Intake System
AIR INTAKE SYSTEM
AIR CLEANER REMOVAL
1.
Disable the vehicle.
2.
Disconnect battery and spark plug wire.
3.
Loosen the clamp (1) and disconnect air intake hose from throttle body (Figure 21-10, Page 21-10).
4.
Remove the screws (2).
5.
Remove the air intake system (3).
AIR CLEANER INSTALLATION
1.
Install the air intake system (3) into the vehicle (Figure 21-10, Page 21-10).
2.
Install the screws (2). Tighten the screws to 85 in·lb (9.5 N·m).
3.
Connect the air intake hose to the throttle body.
4.
Install the clamp (1).
5.
Connect the battery and spark plug wire.
Page 21-10
2019 Precedent,Villager 2 and 4 Maintenance and Service Manual
Figure 21-10 Air Intake System
GASOLINE VEHICLE - FUEL SYSTEM
Advertisement
Table of Contents
Troubleshooting
