Club Car Precedent Villager 2 2019 Maintenance And Service Manual page 448

23
Drive Clutch
1
2
3
4
3053
Figure 23-7 Drive Button Mounting
5. Remove the clutch weights:
5.1. Remove the screws (1) and flat washers (2) attaching the weights (3) as shown (Figure 23-8, Page 23-8).
5.2. Pull the weight assemblies (3), with pins, from slots (4) in the clutch. See following NOTE.
NOTE: Before removing, note the orientation of the wave washer (1) and secondary weight (2) on the primary weight
(3) (Figure 23-9, Page 23-9).
5.3. Remove the plastic washers, weights (2 and 3) and wave washer (1) from the pin (4). Retain all parts.
Page 23-8 2019 Precedent,Villager 2 and 4 Maintenance and Service Manual
GASOLINE VEHICLE - CLUTCHES
3
601
Figure 23-8 Weight Position
1
2