Table of Contents
Advertisement
STEERING AND FRONT SUSPENSION
STEERING COLUMN INSTALLATION
2622C
1.
Apply a light coat of anti-seize or lubricating compound to the pinion shaft (1) (Figure 7-5).
2.
Install the universal joint (2) onto pinion shaft.
3.
Install the bolt (3) and tighten by hand. Do not fully tighten the bolt.
4.
Install the steering column mounting bracket (4) on the vehicle frame.
5.
Install the bolts (5). Tighten the bolts to 18.4 lb·ft (25 N·m).
6.
Tighten the bolt (3) to 18.4 lb·ft (25 N·m).
7.
Make sure that the upper universal joint bolt (6) is tighten to 18.4 lb·ft (25 N·m).
8.
Install front bumper, dash assembly, dash insert, and instrument panel.
9.
Install the steering wheel.
10.
Electric Vehicle: Connect the batteries.
Gasoline Vehicle: Connect the battery and spark plug wire.
Figure 7-5 Steering Column Installation
2019 Precedent,Villager 2 and 4 Maintenance and Service Manual
7
Steering Column
Page 7-5
Advertisement
Table of Contents
Troubleshooting
