BODY AND TRIM
BAG RACK ASSEMBLY
Bag Rack Removal
1.
Remove the two screws (1) (Figure 4-27).
2.
Remove the bag rack (2) from the SAM (3).
Bag Rack Installation
1.
Install the bag rack (2) onto the SAM (3) (Figure 4-27).
2.
Install the two screws (1). Tighten the screws to 53 lb·in (6 N·m).
Figure 4-27 Bag Rack
2019 Precedent,Villager 2 and 4 Maintenance and Service Manual
Two-Passenger - Rear Body
4
Page 4-31