Table of Contents
Advertisement
18
Troubleshooting Guide
LOW OIL WARNING LIGHT
CAUTION
• Failure to add oil immediately when the low oil warning light stays on may result in permanent
engine damage.
Figure 18-1 Low Oil Warning Light
_
MALFUNCTION INDICATOR LIGHT
_
TROUBLESHOOTING GUIDE
The following troubleshooting guides will be helpful in identifying operating difficulties should they occur. The guides
include the symptom, probable cause and suggested checks. The procedures used in making these checks can be
found in the referenced sections of the maintenance and service manual.
Page 18-2
2019 Precedent,Villager 2 and 4 Maintenance and Service Manual
The low oil warning light gives a visual indication of an oil level problem.
STATUS
OFF
ON
The malfunction indicator light (MIL) gives a visual indication of an engine fault. When the key switch is
set to ON, the MIL will turn on for 3 seconds.
If an engine fault is sensed, the MIL will stay on. See the Kohler Engine Service Manual for more
information.
GASOLINE VEHICLE - TROUBLESHOOTING
CONDITION
Normal Operation
When possible:
1.
Stop the vehicle.
2.
Turn the key to OFF.
3.
Examine the engine oil level.
4.
Add engine oil as necessary.
5.
If the low oil level warning light stays on, have a trained technician
examine the vehicle.
AND ELECTRICAL SYSTEM
Advertisement
Table of Contents
Troubleshooting
