ELECTRIC VEHICLE - ELECTRICAL
COMPONENTS
2787
Figure 13-3 Charge Indicator Light
USB PORT
The 5–volt 3 amp USB port (Figure 13-4) provides electricity to power and recharge portable devices. The USB
port is not designed for the transfer of data.
Figure 13-4 USB Port
USB PORT REMOVAL
1.
Remove the instrument panel to access the USB port wires and lock tabs (Figure 13-5, Page 13-4).
2.
Disconnect the USB port wires.
3.
Push the lock tabs on both sides and remove the USB port.
1
2019 Precedent,Villager 2 and 4 Maintenance and Service Manual
13
USB Port
Page 13-3