Removing Tape Cartridges; Installing Shipping Restraints And Packing - Quantum P3000 Series User Manual

Removing Tape
2
Cartridges
Installing Shipping
Restraints and
2
Packing
• Disconnecting library cables
Always prepare the library for relocation before any
Caution:
move.
To remove tape cartridges:
Unload all tape cartridges from the tape drives.
1
Stop all library operation.
2
Press the Standby button on the GUI. This places the library
a
off-line after the completion of any currently executing
operations. When the library is off-line, the GUI system
state display indicates "System Off-line."
Press the Stop button to remove power from library
b
robotics.
Unlock and open both library doors.
3
Turn off the library.
4
Remove all tape cartridges from the library bins and tape
5
drives.
Carefully pack all tapes for shipment.
6
To install internal shipping restraints:
Remove the extension axis restraints from their storage
1
location in the chassis (see
Quantum|ATL P3000 Series User's Guide
Appendix B Relocating the Library
Preparing the Library for Relocation
figure 42).
87