Table of Contents
Advertisement
Chapter 2 Basic Library Operations
Installing Tape Cartridges
Figure 8 Inserting a
Bar Code Label (DLT/
SDLT)
18
Slide-in slot
Only use bar code labels that have been designed
Note:
for cartridges. Do not adhere labels to a cartridge
anywhere except the slide-in slot.
Setting the Write-Protect Switch
Each tape cartridge has a write-protect switch similar to that
shown in
figure
9. This switch determines whether new data can
be written to the cartridge (write-enabled) or whether data on the
cartridge is protected from being erased or overwritten (write-
protected).
Proper Insertion Orientation
Refer to
figure 9
for proper label placement, write protection
settings and insertion orientation.
Quantum|ATL P3000 Series User's Guide
2
2
Advertisement
Table of Contents
