Figure 26 Configure:
Options Screen
Performing an Inventory
When you have finished making changes to library options,
6
press the Back button until you return to the initial Operator
Screen.
About
Quantum|ATL
Configure: Options
O
The Inventory Tapes command reads the bar code labels of the
cartridges in the tape drives, fixed storage bins, and the load port
bins. All elements that contain cartridges without labels are
marked as full with no label.
Press the Inventory Tapes button in the Operator screen.
1
The GUI displays a "Command In Progress" screen.
Quantum|ATL P3000 Series User's Guide
Chapter 3 Operator Commands
Overview
Tapes
Performing an Inventory
Operator
Current
Value:
New Value:
49
3