Table of Contents
Advertisement
Chapter 3 Operator Commands
Opening the Operator Screen
Opening the Operator Screen
Figure 22 Password
Screen
44
To open the Operator screen:
Press the Operator tab.
1
The GUI displays the password screen (see
Enter the correct operator or service password to gain access to
2
the Operator Screen (see
The default operator password is 1234.
To change passwords, see
Note:
"Command in Progress" dialog screen is displayed.
on page 64.
Quantum|ATL P3000 Series User's Guide
figure
figure
23).
Press Continue. A
3
22).
Advertisement
Table of Contents
