Table of Contents
Advertisement
Chapter 3 Operator Commands
Unloading the Load Port
54
You can also use the Move Cartridge command to
Note:
unload the load port. The Move Cartridge command is
especially useful if the destination of the move is
important. For more information about the Move
Cartridge command, see
To unload the load port:
On the Operator screen, press the Unload Imp/Exp button.
1
The GUI displays a Command In Progress dialog box is
displayed.
If it becomes necessary to stop the Unload command, press the
2
Abort button
The inventory process is also stopped if an error is
Note:
detected. In this case, the GUI displays an error
message.
Quantum|ATL P3000 Series User's Guide
Moving Cartridges
on page 50."
Advertisement
Table of Contents
