Figure 19 Rotating The Load Port Drum - Quantum P3000 Series User Manual

Chapter 2 Basic Library Operations
Inserting Tape Cartridges into the Load Port
Figure 19 Rotating
the Load Port Drum
38
For more information about these procedures, refer to
Installing Tape Cartridges
With the load port door open, place the tape cartridges in any
2
available load port magazine slot (see
If the magazine is out of the load port, load the tape cartridges
3
into the magazine, then load the magazine into the load port.
The proper orientation for tape cartridge insertion is shown in
DLT/SDLT Cartridges
page 19.
Rotate the load port drum 180
4
faces you (see figure
Take care to keep fingers out of load port
Warning:
openings when opening or closing the load port
door or when rotating the load port drum.
Manually close the load port door by pushing the load port
5
assembly so that it is flush with the front surface of the library.
You will hear a "click" when it locks into position.
Quantum|ATL P3000 Series User's Guide
on page 16.
figure
on page 17 and LTO Cartridges
o
so that the load port handle
19).
Load port
finger grip
20).
on
Load
port
drum