Configuring A Library Option - Quantum P3000 Series User Manual

Chapter 3 Operator Commands
Configuring Library Options
Configuring a
3
Library Option
48
• Retries—causes the library to automatically retry a failed
command before issuing an error message. The default settting
is Enabled.
• Bar Code Labels—turns bar code scanning on or off during
inventory. It should be disabled when the library contains
cartridges that are not labeled. The default setting is Disabled.
• Auto Inventory—causes the library to perform an inventory
whenever the library is powered up. The default setting is
Disabled.
• Auto Load—causes the library to automatically move cartridges
in the load port to empty storage bins as soon as the load port
door closes. The default setting is Disable.
• Temp. Detection—enables or disables the over-temperature
detection warning and shutdown features of the library. The
default setting is Enabled.
• Power-On Security—determines the library security level when
powered up. The default setting is User.
• 4/52 Identity Mode—causes the library to return the same
inquiry string as the ATL 520 library (out of production).
To configure a library option:
In the Operator screen, press the Configure Options button.
1
The GUI displays the Configure: Options screen (see
Press the button with the desired option.
2
Using the arrow buttons, scroll through available values for the
3
selected option.
When the New Value box displays the desired value, press the
4
Execute button to apply the new value.
The Current Value box displays the new value.
Repeat steps 2 through 4 to change other configuration options.
5
Quantum|ATL P3000 Series User's Guide
figure 26).