This chapter describes the commands found on the Operator
screen of the graphical user interface (GUI). The Operator screen
commands initiate the following actions:
• Opening the Operator screen
• Unloading the load port
• Configuring the library*
• Configuring library options*
• Performing an inventory*
• Moving cartridges*
• Unloading a drive*
*
The library must be off-line to perform these functions.
Library operator commands are to be used only by
Caution:
qualified, Quantum|ATL-trained personnel. Serious
operational problems and data loss may occur if you
do not understand the consequences of these
commands.
Quantum|ATL P3000 Series User's Guide
Operator Commands
3
Chapter 3
43