Figure 36 Test: Systest Library Screen - Quantum P3000 Series User Manual

Figure 36 Test:
Systest Library Screen
The Test: SysTest Library screen is displayed (see
Back
About
Quantum|ATL
System
Test: Systest Library
Off-line
Random
Standby
Swap
Load Port
Bins
Swap
Drives
Use
S
Barcodes
Stop
Select one of the following system test options:
2
• Swap Bins - test storage bins only
• Swap Drives - test drives only
Select all desired test options as follows:
3
• Random - swap cartridges at random
• Use Barcodes - read barcode as cartridges are swapped
• Continuous - repeat test until aborted
The Continuous button must be de-selected to enter
Note:
"# of Runs".
When you have selected the type of test and all test options,
4
press the Execute button.
A "Command In Progress" dialog box is displayed.
The system test continues until completed unless you press the
Abort button. If you pressed the Continuous button in step 3,
you must press the Abort button to stop the test.
Quantum|ATL P3000 Series User's Guide
Forward Home
Service
Tapes Operator
# of Runs:
_
Continuous
Execute
Chapter 4 Service Commands
Testing the Library
figure 36).
1 2
3 4
5 6
7 8
9 0
Select
63