Chapter 2 Basic Library Operations
Installing Tape Cartridges
Installing Tape Cartridges
Taking ESD
2
Precautions
16
To install tape cartridges
Label each cartridge
1
Set the write-protect switch
2
Place cartridges in the fixed bins
3
Handle tape cartridges with care. Do not drop or
Caution:
bang them, or place them near sources of
electromagnetic interference. Rough handling can
displace the tape leader, making the cartridge
unusable and potentially hazardous to the tape
drives.
Components within the P3000 contain static-sensitive parts. To
prevent damage to these parts while performing installation,
maintenance, or replacement procedures, observe the following
precautions:
• Keep the library turned off during all installation,
maintenance, and replacement procedures.
Hosts without a direct SCSI interface require external
Note:
communications bus converters.
• Keep the library power cord connected to a grounded power
outlet except when working with AC electrical components.
Avoid contact with the power supplies, EMI
Warning:
filter, and all other AC electrical components
while the library is connected to a power outlet.
Quantum|ATL P3000 Series User's Guide
2