Calibrating The Libraries In A Multi-Unit Configuration; Figure 39 Configure Multi-Unit - Quantum P3000 Series User Manual

Chapter 5 Multi-Unit Commands

Calibrating the Libraries in a Multi-Unit Configuration

Figure 39 Configure
Multi-Unit
Calibrating the Libraries in a Multi-Unit Configuration
68
Back
About
Quantum|ATL
System
Configure: Multi-Unit
Off-line
Library Unit:
Standby
Library Unit #:
Load Port
# of Libraries:
LUN Config:
O
Stop
Press the Select button to access the option to configure.
2
Using the arrow buttons, scroll through the available values for
3
the selected option.
When the desired value is displayed, press the Select button to
4
advance to the next option.
When you have finished making changes to the multi-unit
5
configuration options, press the Change button to save the
options and complete the configuration.
The Calibrate All PTMs command enables you to calibrate all pass
through mechanisms in all of the libraries in the multi-unit
configuration. Calibrate the libraries during the initial installation
and after any maintenance procedure.
To calibrate all library elements:
From the Master library in the multi-unit configuration, press
1
the Multi-Unit tab.
Quantum|ATL P3000 Series User's Guide
Forward Home
Operator Service
SINGLE
SINGLE LUN
Multi
Unit
Select
Change
5