Table of Contents
Advertisement
Quantum SDLT
and IBM Ultrium
2
LTO Tape Drives
When the Operate Handle indicator comes on, raise the insert/
3
release handle to eject the tape cartridge.
Place your finger approximately 1/4 of an inch in
Note:
front of the drive's cartridge opening to ensure that
the cartridge does not drop when ejected.
Pause for at least 3 seconds, then grasp the tape
Caution:
cartridge and slowly pull it half way out of the
drive.
If the tape cartridge leader failed to detach from
Caution:
the take-up leader, push the tape cartridge all of
the way back into the drive, press down the
insert/release handle, and return to step 2.
Otherwise, continue to step 5.
Pull the tape cartridge completely out of the drive.
4
Close and lock the library doors.
5
To manually eject a tape cartridge from Quantum SDLT and IBM
Ultrium LTO T200 tape drives:
Refer to Steps 1a-1f under
1
Press the Unload button on the drive. The Unload button
2
works the same as a soft eject (VCR-style) button.
Quantum|ATL P3000 Series User's Guide
Chapter 2 Basic Library Operations
Manually Ejecting a Tape Cartridge
DLT Tape Drives
on page 40.
41
Advertisement
Table of Contents
