Figure 27 Control: Move Cartridges Screen - Quantum P3000 Series User Manual

Figure 27 Control:
Move Cartridges
Screen
About
Quantum|ATL
Control: Move Cartridge
Source:
Destination:
Range:
O
Identify the source element of the cartridge to be moved.
2
Proceed as follows:
Press the appropriate source element button (Storage Bin,
a
Tape Drive, Load Port, or Gripper). When you press an
element type, the Range field (below the Destination field)
displays the range of addresses .
Using the keypad, enter the address of the source element
b
and then press the Destination input field. The Source
information is displayed in the Source field and the
Destination field becomes active.
Identify the destination for the cartridge:
3
Press the appropriate destination element button (Storage
a
Bin, Tape Drive, Load Port, or Gripper).
Quantum|ATL P3000 Series User's Guide
Chapter 3 Operator Commands
Backspace button:
Use this button to erase a partial
entry - character by character
Overview Tapes
Moving Cartridges
Operator
51