Figure 40 Multi-Unit Screen - Quantum P3000 Series User Manual

Figure 40 Multi-Unit
Screen
The GUI displays the Multi-Unit screen (see
Press the Calibrate All PTMs button.
2
The GUI displays a Command In Progress dialog box while the
calibration process is in progress.
Multi-Unit calibration MUST be executed from the
Note:
master library designated during multi-unit
configuration.
Back
About
Quantum|ATL
System
Multi-Unit
Off-line
Standby
Load Port
O
Stop
Quantum|ATL P3000 Series User's Guide
Chapter 5 Multi-Unit Commands
Calibrating the Libraries in a Multi-Unit Configuration
Forward
Operator Service
Configure
Multi-Unit
Calibrate
All PTMs
figure 40).
Home
Multi
Unit
69