Figure 18 Password Screen - Quantum P3000 Series User Manual

Figure 18 Password
Screen
About
Quantum|ATL
Operator
O
Enter a password if necessary.
3
A password is required to enter a higher security level than the
current level.
Press the Select button.
4
A screen appears indicating that the new security level has
been set successfully.
Press Okay.
5
The lock icon displays the new security level (S, O, U, I, or L).
This procedure is especially useful to change from
Note:
Operator or Service levels to the User level after
executing an Operator or Service level command.
If the GUI is accessed from the Service (S) or
Note:
Operator (O) level, and no activity has occurred for
15 minutes, the GUI will return to the initial screen
(see figure
Quantum|ATL P3000 Series User's Guide
Chapter 2 Basic Library Operations
Changing the GUI Security Levels
Tapes Service
12).
35