Introduction; About This Guide; About The Netpa Ultra Series; Features - Extron electronics NetPA Ultra Series User Manual

2-channel and 4-channel dsp and dante-enabled power amplifiers
Hide thumbs Also See for NetPA Ultra Series:
Table of Contents

Advertisement

Introduction

This section gives an overview of the Extron NetPA Ultra Series: NetPA U 1004,
NetPA U 1004-70V, and NetPA U 1004-100V, as well as the NetPA U 1002,
NetPA U 1002-70V, and NetPA U 1002-100V. The NetPA Ultra Series is a collection of
4-channel and 2-channel power amplifiers. Topics in this section include:

About This Guide

This guide describes the NetPA Ultra Series: a series of 4-channel and 2-channel DSP and
Dante enabled power amplifiers and discusses how to install, configure, and operate them.
In this guide, the terms "unit," "NetPA Ultra Series amplifier," "amplifier," and "power
amplifier" refer to the NetPA Ultra Series of power amplifiers.

About the NetPA Ultra Series

The Extron NetPA Ultra Series NetPA U 1002 and NetPA U 1004 are Dante-enabled,
ENERGY STAR ® qualified power amplifiers that deliver two to four 100 watt channels in a
half rack, 1U, plenum rated enclosure.
With their integrated DSP, the NetPA U 1002 and NetPA U 1004 include essential signal
processing that offers the ability to meet the requirements of complex, decentralized
systems, while Dante Domain Manager and AES67 support ensure wide compatibility with
enterprise configurations and other network audio devices. Exceptional thermal design
provides the ability to install units without using rack spaces for ventilation, conserving
precious rack space. The NetPA U 1002 and NetPA U 1004 are highly efficient advanced
Class D amplifiers that feature defeatable auto-standby with fast wake up and our patented
CDRS – Class D Ripple Suppression.

Features

About This Guide
About the NetPA Ultra Series
Features
Receives audio from the Dante audio network as well as from analog mic/
line level inputs — Select a channel from any remote Dante-enabled device on
the network, or an analog source, to be brought into the NetPA Ultra Series for
amplification.
100 watts rms output power per channel at 8 ohms, 4 ohms, or 70/100V — All
channels driven.
NetPA Ultra Series • Introduction
1

Advertisement

Table of Contents
loading

Table of Contents