Extron electronics NetPA Ultra Series User Manual page 74

To edit an existing group:
Select Tools > Configure Groups to open the Configure Groups dialog box (see
1.
figure 73).
2. From the Select Group drop-down list (
From the Select Control Type panel (
3.
4. Choose which gain stage to edit.
From the Available Group Members panel (
5.
members of the group.
6. Click Apply ( ).
4
From the Confirm Group Details dialog box, the group number and group name can
7.
be edited ( ).
5
8. Click OK to confirm the group details (
When the Overwrite Group dialog box opens, click OK to confirm the changes made
9.
to the group.
To edit only a group name:
1.
Choose the group from the Select Group drop-down list (
2. Click Change Name (
7
From the Change Group Name dialog box, enter the new group name into its field (
3.
4. Click OK ( ).
6
2
1
4
7
Figure 73. Editing a Group
), select an existing group to edit.
1
), expand a control type.
2
), select or deselect channels to be
3
).
6
).
3
4
NetPA Ultra Series • Configuration Tools
).
1
5
5 5
6
).
67