Extron electronics NetPA Ultra Series User Manual page 99

Command SIS Command
Function (Host to Device)
Naming
Write Name
Write input name
E X!
Write output name
E X!
Write preset name
E X#
Write group master name
E
View Name
View input name
E X!
Verbose mode 2/3
View output name E X!
Verbose mode 2/3
View group master name
E
Verbose mode 2/3
Presets
Recall Preset
X#
KEY:
X!
=
Input/output number
X@
= Input/output name
X#
= Preset number
X$
= Preset name
=
X1$
Group master number
Audio Level Control
NOTE: The command format is the same regardless of the control point, but the acceptable gain range varies depending on the control point.
•
The mic/line input gain range is -18 dB to +60 dB in 0.1 dB increments.
•
The pre-mixer gain and virtual return gain range is -100 dB to +12 dB in 0.1 dB increments.
•
The post-mixer gain and virtual return gain range is -12 dB to +12 dB in 0.1 dB increments. Post-mixer trim cannot be muted
•
The output attenuation gain range is -100 dB to 0 dB in 0.1 dB increments.
•
All responses are shown in Verbose Mode 2 or 3.
Set gain level E
Read gain level E
KEY:
X7@
See
=
Target OID
Levels use a 10x multiplier system with no decimal spaces. For example, a level of +10.4 dB would be entered as 104
X7#
=
Gain value
and a level of -3.2 dB would be entered as -32
Response
(Device to Host)
X@ }
NI
,
X@ }
NO
,
X$ }
NG
,
X1$ }
N *nameGRPM
}
NI
}
NO
X1$ }
N GRPM
.
Input: 1 = Analog Line Input 1
2 = Analog Line Input 2
3 = Analog Line Input 3
4 = Analog Line Input 4
12 characters. Illegal characters: ~ , @ = ` [ ] { } < > ` " ; : | \ and ?
1 to 8
Illegal characters: ~ , @ = ` [ ] { } < > ` " ; : | \ and ?
1 through 32
X7@ X7# }
G * AU
X7@ }
G AU
Object ID (OID) Number Tables
X! , X@]
Nmi
X! , X@]
Nmo
X# , X$]
Nmg
X1$ ]
GrpmN *name
X@]
X! X@]
Nmi
,
X@]
X! X@]
Nmo
,
]
name
X1$ ]
GrpmN *name
X#]
Rpr
Output: 1 = Amplifier Output 1
2 = Amplifier Output 2
3 = Amplifier Output 3
4 = Amplifier Output 4
X7@ X7#]
DsG *
X7@ X7#]
DsG *
on page 99.
NetPA Ultra Series • Remote Control and Configuration
Additional Description
5 = Analog Line Output 1
6 = Analog Line Output 2
7 = Analog Line Output 3
8 = Analog Line Output 4
X7@
Set gain on OID to a value of
X7@
Read gain on OID to a value of
X7#
dB.
X7#
dB.
92