Changing System Appearance; Setting Ring Tones And Alert Tones - Polycom VSX Series Administrator's Manual

Changing System Appearance

Setting Ring Tones and Alert Tones

Different system appearance options are available, allowing you to coordinate
the system interface with the meeting room décor.
To change the system appearance:
1. Go to System > Admin Settings > General Settings > System Settings >
Appearance.
2. Configure the color scheme.
You can allow users to change color schemes by allowing user access to the
User Settings screen.
To set ring tones and alert tones:
1. Go to System > Admin Settings > Audio > Audio Settings.
2. Select a tone, as desired.
To set the VSX 3000A system's internal ringer:
1. Go to System > Admin Settings > Audio > Audio Settings.
2. Select Enable Internal Ringer to specify an additional ring tone when
receiving an incoming call. The ringer is built into the system and will
alert you to incoming calls.
Appearance and Tones
7 - 7