To Connect The Trigger Signals To A Logic Analyzer Without An Emulation Module - Agilent Technologies E5900B User Manual

To connect the trigger signals to a logic analyzer
without an emulation module
The cable used to connect the emulation probe to the logic analyzer should be
a SMB to BNC adapter cable.
1 Connect the emulation probe's BREAK IN connector to the logic
analyzer's Port Out connector.
2 Connect the emulation probe's TRIG OUT connector to the logic
analyzer's Port In connector.
Logic Analysis System
Target Target Keyboard
To 16701 Expansion Frame To 16701 Expansion Frame
Control Control
Port In Port Out
E5900B / E5901B User's Guide Supplement
Mouse
Coordinating Logic Analysis with Processor Execution
65