Agilent Technologies E5900B User Manual page 78

8 Reinstall the cover on the emulation probe:
a Slide the top cover into place.
b Assemble the new front panel.
c Attach the front panel using the 2 screws and 2 nuts.
9 Connect the LAN cable, module/probe interconnect cable (if you will
be using the emulation probe with an emulation module), and the LAN
cable to the emulation probe. Do not connect a target cable yet.
10 Turn on power to the emulation probe.
11 Update the emulation probe's firmware.
See Chapter 8, "Updating Firmware," beginning on page 67 for instructions on
how to update firmware.
12 Run the performance verification test.
See page 103 for instructions on testing the emulation probe.
13 Connect the emulation probe to your target system.
See Chapter 4, "Connecting the Emulator to Your Target System," beginning
on page 47, and your emulation or solution User's Guide for instructions on
how to make this connection.
E5900B / E5901B User's Guide Supplement
Installing an Agilent E5902B Emulation Migration
77