Minimum equipment required
The following equipment is required to use the emulation module:
• A method for connecting the emulation probe to the target system. The
target system must have an appropriate JTAG or BDM debug port
connector. If your target system does not have a debug port connector,
you may be able to use the debug port connector which is built into some
analysis probes. The target system must meet the criteria on page 49.
• An Agilent 16700-series logic analysis system.
• A user interface, such as a high-level source debugger or the logic analysis
system's Emulation Control Interface.
E5900B / E5901B User's Guide Supplement
Agilent E5901B Emulation Module
Overview
19