To Use The Built-In Commands - Agilent Technologies E5900B User Manual

Troubleshooting the Emulator
Emulation Probe Built-in Commands

To use the built-in commands

Here are a few commonly used built-in commands:
Useful built-in commands
b Break—go into the background monitor state
cf Configuration—read or write configuration options
help Help—display online help for built-in commands
init Initialize—init -c re-initializes everything in the emulation
probe except for the LAN software
lan configure LAN address
m Memory—read or write memory
reg Register—read or write a register
mtest Memory test—test target memory system
r Run—start running user code
rep Repeat—repeat a command or group of commands
rst Reset—reset the target processor
s Step—do a low-level single step
ver Version—display the product number and firmware version of the
emulation probe
Use help command_name to see the command syntax. For example, enter
help m to get help on the memory command.
94 E5900B / E5901B User's Guide Supplement