Minimum Equipment Required - Agilent Technologies E5900B User Manual

Minimum equipment required

The following equipment is required to use the emulation migration:
• An Agilent E5900B emulation probe.
• A method for connecting the emulation probe to the target system. The
target system must have an appropriate JTAG or BDM debug port
connector. If your target system does not have a debug port connector,
you may be able to use the debug port connector which is built into some
analysis probes. The target system must meet the criteria on page 49.
• A host computer such as a PC, a workstation, or an Agilent 16700-series
logic analysis system.
• A user interface, such as a high-level source debugger or the logic analysis
system's Emulation Control Interface.
E5900B / E5901B User's Guide Supplement
Agilent E5902B Emulation Migration
Overview
21