Table of Contents
Advertisement
Installing an Agilent E5902B Emulation Migration
4 Remove the 3 nylon screws from the target board adapter.
5 Carefully lift the target board adapter from the main circuit board.
Do not turn on power to the emulation probe when no target board adapter is
installed.
You cannot run performance verification tests or make any measurements
without a target board adapter.
6 Install the new target board adapter on the main circuit board.
Align both connectors and press down firmly.
7 Replace the 3 nylon screws.
76
E5900B / E5901B User's Guide Supplement
Advertisement
Table of Contents
Troubleshooting
