Table of Contents
Advertisement
Installing the Emulation Module
5 Install the emulation module.
6 Connect the cable and re-install the screws.
You may connect the cable to either of the two connectors.
7 Reinstall the bottom cover, then turn the frame right-side-up.
8 Plug in the power cord, reconnect the other cables, and turn on the
logic analysis system.
The new emulation module will be shown as an "E5901B Emulation Module" in
the system window.
44
E5900B / E5901B User's Guide Supplement
Advertisement
Table of Contents
Troubleshooting
